CC-link Slave Interface

The Anybus-S module for CC-link is available with a 2 kByte Parallel Dual Port Ram interface. The module can be initialized with any of the profiles that are supported with a Remote Device Unit.

The CC-Link address and baudrate can be selected via switches on the front side of the module or by software via the application interface. An DC/DC converter provides a galvanically isolated fieldbus interface. When used in standard mode the module support CC-Link version 1, but can during initialisation be configured for CC-Link version 2 functionality.


   POINTS CLÉS
  Dual port (DPRAM) parallel interface
  Total 128 I/O points (bit) and 32 words
  Number of occupied stations: 1-4
  Supports profiles for "Remote Device"
  CC-Link conformance BTP-05027-B specification
  Support for CC-Link version 2.0 with extended data

  SPÉCIFICATIONS TECHNIQUES
Taille:   54 mm x 86 mm x 15 mm
Power Supply:   +5V max 300mA
Température:   0-70°C
Baud Rate:   156 kbit/s to 10 Mbit/s
Interface Appl:   Parallel
Max I/O data:   Total 128 I/O points (bit) and 16 words IN/OUT data
Configuration:   From Rotary switches or from application interface
CC-Link services:   Remote device station, ID number: 0x0212
UL file:   E214107
Product Life Cycle:   Mature (not recommended for new in-designs)
Code:   AB4210