|Profinet IRT Device - Profibus Slave|
The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).
The PROFINET interface works as a I/O-Device on the PROFINET IO or IRT network. The interface support up to 220 bytes of IO for both Input and Output data. The module baud rate is 100Mbit/s (full duplex). Four LEDs will continuously indicate the actual PROFINET status and eventually error messages. The module also supports the normal PROFINET Alarm functionality. The interface uses 2 normal RJ45 connectors for the PROFINET connection.
The PROFINET IO/IRT module also support functions like Webserver and FTP functions. The IT functions can be used simultaneously with the PROFINET communication.
The PROFIBUS DP/DPV1 slave interface is implemented according to the standard IEC61158 as a modular slave, supporting all standard functionality such as Watchdog, Sync and Freeze and diagnostics. Including I&M functions. Standard DP as well as DPV1 acyclic data services (Class1/Class2) are supported. The PROFIBUS interface module is certified by the PROFIBUS user organization and has proven conformance and interoperability with leading PLC´s, HMI´s etc. PROFIBUS address is set via rotary switches 0-99.
|Complete Profibus DP and DPV1 (Class1/Class2) slave functionality according to IEC 61158|
|Integrated IRT switch functionality|
|Dynamic webserver with flash disc|
|PROFINET IO and PROFINET IRT compatible|
|Integrated 2 port switch|
|Taille:||114 mm x 44 mm x 127 mm|
|Power Supply:||24 VDC (±20%)|
|Consommation:||max 400 mA at 24V|
|I/O Input:||220 bytes|
|I/O Output:||220 bytes|
|Power supply connect:||2-pole 5.08 mm Phoenix pluggable screw connector|
|Profibus baudrate:||9600 bit/s - 12 Mbit/s autodetect|
|Profibus address:||Node address 0-99|
|Profibus connector:||D-sub 9-pin female|
|Profibus config:||Configured by Profibus Master via GSD file (provided by HMS)|