Ethernet/IP Adapter/Slave - EtherCAT Slave

The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).

The Anybus OPC Server is supported and included with this X-gateway. It enables fast and dynamic transfer of fieldbus data to and from e.g. SCADA/HMI/Enterprice level systems based on Microsoft Windows.

The EtherNet/IP interface consists of an embedded 2-port Ethernet/IP 10/100 Mbit/s interface with IT functionality such as WEB-server, SSI-scripts, Flash file system, FTP-server, Email client, Telnet etc. It is possible to build web pages displaying and controlling a factory floor process with data from the other connected network. The EtherNet/IP interface module is certified by the ODVA and has proven conformance and interoperability with leading PLC´s, HMI´s etc. The dual port Ethernet interface will allow daisy chaning and removes the need for any external switch.

The EtherCAT Slave Interface for the Anybus X-gateway implements CANopen over EtherCAT, and exchanges up to 512 bytes of data in each direction. The interface acts as a slave node, which means it can be accessed by an EtherCAT master, but it will not initiate communication by itself.
The module has two RJ45 connectors using 100 Mbit full duplex Ethernet. For configuration a XML-format device despription file is supplied by HMS.




   POINTS CLÉS
  Ethernet 10/100 Mbit/s twisted pair RJ45 connection
  TCP/IP settings configurable with web-page, Configuration Tool, DHCP, ARP or with DIP switches
  1.4 Mbyte storage space on Flash disk
  Support for AnyBus IPconfig utility for easy TCP/IP set up
  Gateway diagnostics via WEB-pages
  EtherCAT interface supports CANopen objects (SDOs&PDOs)
  Up to 512 bytes of cyclic data in each direction (PDO)
  Up to 512 bytes of acyclic data in each direction (SDO)
  Compliant with specification DS301 v4.02
  Support for Anybus OPC Server
  EtherNet/IP CONFORMANCE TESTED™
  Announced based DLR (Device Level Ring)

  SPÉCIFICATIONS TECHNIQUES
Taille:   114 mm x 44 mm x 127 mm
Power Supply:   24 VDC (±20%)
Température:   -25-65°C
Consommation:   Max 400mA at 24VDC
I/O Input:   Default 20 bytes, max 512 bytes
I/O Output:   Default 20 bytes, max 512 bytes
Puissance Mécanique:   IP20/Nema1
Power supply connect:   2-pole 5.08 mm Phoenix pluggable screw connector
Ethernet/IP baudrate:   10/100 Mbit/s autodetect
Ethernet connector:   RJ45
Ethernet/IP address:   Any valid IP-address
Ethernet/IP config:   Configured by EtherNet/IP Scanner via EDS file (provided by HMS)
EtherCAT baudrate:   100 Mbit/s full duplex
EtherCAT connector:   RJ45
EtherCAT config:   Configured by EtherCAT Master via XML file (provided by HMS)
Price Group:   A
Code:   AB7682