|Profibus Master - EtherCAT Slave|
The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).
The Profibus-DP Master interface supports connection of up to 125 slaves at baudrates up to 12 Mbit/s. The Profibus configuration is defined with NetTool-PB, a Windows based configuration software for Profibus from HMS (included free of charge).
The Anybus Profibus-DP Master interface module is certified by the Profibus user organization and has proven conformance and interoperability with leading manufacturers of I/O, drives, instruments etc
Configuration is downloaded to the module via the RS232 configuration port.
The EtherCAT Slave Interface for the Anybus X-gateway implements CANopen over EtherCAT, and exchanges up to 512 bytes of data in each direction. The module has two RJ45 connectors using 100 Mbit full duplex Ethernet. For configuration a XML-format device despription file is supplied by HMS.
|Profibus configuration: NetTool-PB for Windows|
|Complete Profibus DP Master according to IEC 61158|
|Up to 125 slaves can be connected|
|Profibus configuration through RS232 configuration port|
|Supports PA baud rate 45.45 kbit/s|
|Full EtherCAT slave|
|Supports SDOs and PDOs|
|100 Mbit full duplex Ethernet|
|Up to 512 bytes of cyclic data in each direction (PDO)|
|Up to 512 bytes of acyclic data in each direction (SDO)|
|Taille:||114 mm x 44 mm x 127 mm|
|Power Supply:||24 VDC (±20%)|
|Consommation:||max 400 mA at 24V|
|I/O Input:||Default 20 bytes, max 512 bytes|
|I/O Output:||Default 20 bytes, max 512 bytes|
|Puissance Mécanique:||IP20 /NEMA1|
|Power supply connect:||2-pole 5.08 mm Phoenix pluggable screw connector|
|Profibus baudrate:||9600 bit/s - 12 Mbit/s|
|Profibus address:||Node address 0-125|
|Profibus connector:||D-sub 9-pin female|
|EtherCAT baudrate:||100 Mbit/s|
|EtherCAT config:||Configured by EtherCAT Master via XML file (provided by HMS)|
|Accessory order code:||018330 (NetTool-PB configuration tool for Profibus)|