|Ethernet/IP Scanner/Master - Modbus Plus Slave|
The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).
The EtherNet/IP Scanner interface supports connection of up to 64 adapters (slaves) at 10/100 Mbit/s. The module also supports IT functionality such as Web server, SSI-scripts, E-mail client and FTP-server. Ethernet settings are configurable through the built-in Web server or the software Anybus IP configuration utility from HMS. The Anybus X-gateway also has on board IP configuration switches. The EtherNet/IP interface module is certified by ODVA and has proven conformance and interoperability with leading PLC’s HMI’s etc. The configuration of the EtherNet/IP network is done with a built in web interface or with RS Networx from Rockwell.
The Modbus Plus interface is based on licensed chip-set and software from Modicon Inc. Supporting both the Global Database and Register mapping to 3x and 4x registers this module implements a versatile Modbus Plus interface. The Modbus Plus interface module is certified by the Modconnect and has proven conformance and interoperability with leading PLC´s, HMI´s etc
|Supports up to 64 adapters (slaves)|
|Ethernet settings are configurable through a built-in web server, the DIP-switches or the Anybus IP configuration utility.|
|SSI scripts used for easy display/control of process data on web pages|
|Easy configuration of the EtherNet/IP network, via a built in web interface.|
|Taille:||114 mm x 44 mm x 127 mm|
|Power Supply:||24 VDC (±20%)|
|Consommation:||max 400 mA|
|Baud Rate:||10/100 Mbit/s autodetect|
|I/O Input:||Default 20 bytes, max 512 bytes|
|I/O Output:||Default 20 bytes, max 512 bytes|
|Power supply connect:||2-pole 5.08 mm Phoenix pluggable screw connector|