CC-Link Plug-In Module

The Anybus-CompactCom CC-Link is a CC-Link slave module, providing instant CC-Link connectivity via the uniform Anybus-CompactCom host interface.
Since the Anybus-CompactCom software interface is designed to be protocol independent, no additional driver code needs to be written in order to use the module; ADIs and Process Data can be accessed from the network, and important host application events can be reported to the network in a standardized way using the Diagnostic Object.
The module can be initialized with any of the supported profiles of a Remote Device Unit. The module works with the PLC profile as default. When used in standard mode the module support CC-Link version 1, but can during initialisation be configured for CC-Link version 2 functionality.


   POINTS CLÉS
  Supports all profiles for a Remote Device (default PLC profile)
  Total 128 I/O points (bit) and 16 Words IN/OUT data (CC-Link ver 1)
  No of occupied stations: 1-4
  Selectable baud rates from 156kbit/S to 10 Mbit/s
  Optically isolated CC-Link interface
  Complete CC-Link functionality & Conformance according to BTP-050227-B specification
  Support for CC-Link version 2.0 with extended data

  SPÉCIFICATIONS TECHNIQUES
Taille:   52 mm x 50 mm x 22 mm
Power Supply:   3,3 Volt
Température:   -40 to +70°C
Baud Rate:   156kbit/s to 10Mbit/s
Config Méthode:   Application interface (switch 1&2)
Interface Appl:   Parallel and serial
Order Code:   AB6311 (Without Housing)
Code:   AB6211