DeviceNet Scanner/Master - ModbusTCP Slave/Server

The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).

The Anybus OPC Server is supported and included with this X-gateway. It enables fast and dynamic transfer of fieldbus data to and from e.g. SCADA/HMI/Enterprice level systems based on Microsoft Windows.

The DeviceNet Master interface can act both as a Master/Scanner and/or Adapter/Slave. The entire DeviceNet protocol is implemented into the module. The module manages control of up to 63 DeviceNet slaves. Full DeviceNet configuration can be defined and loaded into the Anybus-M module via the HMS configuration software NetTool-DN (included free of charge) or via Rockwell´s RSNetWorx.

The EtherNet/IP interface consists of an embedded 2-port Ethernet/IP 10/100 Mbit/s interface with IT functionality such as WEB-server, SSI-scripts, Flash file system, FTP-server, Email client, Telnet etc. It is possible to build web pages displaying and controlling a factory floor process with data from the other connected network. The EtherNet/IP interface module is certified by the ODVA and has proven conformance and interoperability with leading PLC´s, HMI´s etc. The dual port Ethernet interface will allow daisy chaning and removes the need for any external switch.


   POINTS CLÉS
  10/100 MBit twisted pair RJ45 connection
  TCP/IP settings configurable with web-page, Configuration Tool, DHCP, ARP or with DIP switches
  Modbus/TCP class 0, class 1 and partially class 2 slave functionality
  1.4 Mbyte storage space on Flash disk
  Support for AnyBus IPconfig utility for easy TCP/IP set up
  SSI scripts used for easy display/control of process data on WEB-pages
  Gateway diagnostics via WEB-pages
  Complete DeviceNet 2.0 scanner implementation according to ODVA
  DeviceNet Group 2 Client/Server / UCMM support
  Manages up to 63 DeviceNet slaves
  DeviceNet Configuration via AnyBus NetTool-DN or RSNetworx
  DeviceNet Explicit peer to peer messaging, configuration consistency value. I/O Slave messaging: Bit strobe, Polling, Cyclic & Change of State (COS)
  Support for Anybus OPC Server
  2 Modbus-TCP ports simultaneously available through integrated switch

  SPÉCIFICATIONS TECHNIQUES
Taille:   114 mm x 44 mm x 127 mm
Power Supply:   24 VDC (±20%)
Température:   -25-65°C°C
Consommation:   max 300 mA
I/O Input:   Default 20 bytes, max 512 bytes
I/O Output:   Default 20 bytes, max 512 bytes
Puissance Mécanique:   IP20/Nema1
Config Méthode:   NetTool-DN or RS Networks.
Power supply connect:   2-pole 5.08 mm Phoenix pluggable screw connector
DeviceNet baudrate:   125-500 kbit/s
DeviceNet MacID:   0-63
DeviceNet connector:   5-pole 5.08 mm Phoenix pluggable screw connector
Modbus-TCP connector:   RJ45
Modbus-TCP address:   Any valid IP-address
Modbus-TCP baudrate:   10/100 Mbit/s autodetect
Accessory order:   018021 (NetTool-DN configuration tool for DeviceNet)
Price Group:   B
Code:   AB7630