|Profinet IO Device - Modbus Plus Slave|
The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).
The Anybus OPC Server is supported and included with this X-gateway. It enables fast and dynamic transfer of fieldbus data to and from e.g. SCADA/HMI/Enterprice level systems based on Microsoft Windows.
The Modbus Plus interface is based on licensed chip-set and software from Modicon Inc. Supporting both the Global Database and Register mapping to 3x and 4x registers this module implements a versatile Modbus Plus interface. The Modbus Plus interface module is certified by the Modconnect and has proven conformance and interoperability with leading PLC´s, HMI´s etc
The Profinet IO interface is a complete solution for a Profinet IO slave Device. The module is based on the Siemens Profinet IO software technology.
The Profinet IO baudrate is 100Mbit/s (full duplex). The IP-address and additional IP-settings is easily configured with the Anybus IPconfig utility for Windows. Additional ways to set the IP-address are either via DHCP or the Profinet configuration tool. Four diagnostic LEDs will continuously indicate the actual Profinet IO status and possible error messages. The Profinet IO interface uses a normal RJ45 connector for the bus connection.
IT-functions like WEB-server, E-mail client, FTP-server are also supported. The IT functions can be used simultaneously with the Profinet IO communication.
Modbus/TCP is also supported with "Read Data" functions.
|Modbus Plus Global Data Base Transaction, Point-to-Point commands, Read holding registers, Preset single register|
|Modbus Plus Host Firmware Rev. 77|
|SSI scripts used for easy display/control of process data on webpages|
|Gateway diagnostics via WEB-pages|
|E-Mail Client, FTP & Telnet Server|
|Profinet 100 Mbit/s twisted pair RJ45 conn...|
|Profinet IO and IT functions|
|1 Mbyte storage space on Flash disk|
|TCP/IP settings configurable with Profinet config tool, Anybus IPconfig, DHCP or the Profinet configuration tool|
|Support for Anybus OPC Server|
|Taille:||114 mm x 44 mm x 127 mm|
|Power Supply:||24 VDC (±20%)|
|Consommation:||max 400 mA|
|I/O Input:||Default 20 bytes, max 512 bytes (max 64 bytes as Modbus Plus Global Data)|
|I/O Output:||Default 20 bytes, max 512 bytes (max 64 bytes as Modbus Plus Global Data)|
|Power supply connect:||2-pole 5.08 mm Phoenix pluggable screw connector|
|Modbus Plus address:||Node-ID and Source-ID 1-64|
|ModbusPlus connector:||D-sub 9-pin female|
|Profinet IP-address:||Any valid IP-address|