Profinet IO Device - DeviceNet Adapter/Slave

The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).

The Anybus OPC Server is supported and included with this X-gateway. It enables fast and dynamic transfer of fieldbus data to and from e.g. SCADA/HMI/Enterprice level systems based on Microsoft Windows.

The high performance DeviceNet Slave interface provides instant connectivity to the DeviceNet network. The module conforms to DeviceNet 2.0. The DeviceNet interface module is certified by the ODVA and has proven conformance and interoperability with leading PLC´s, HMI´s etc. Baud rate and MAC ID can be set via DIP switches.

The Profinet IO interface is a complete solution for a Profinet IO slave Device. The module is based on the Siemens Profinet IO software technology.
The Profinet IO baudrate is 100Mbit/s (full duplex). The IP-address and additional IP-settings is easily configured with the Anybus IPconfig utility for Windows. Additional ways to set the IP-address are either via DHCP or the Profinet configuration tool. Four diagnostic LEDs will continuously indicate the actual Profinet IO status and possible error messages. The Profinet IO interface uses a normal RJ45 connector for the bus connection.
IT-functions like WEB-server, E-mail client, FTP-server are also supported. The IT functions can be used simultaneously with the Profinet IO communication.
Modbus/TCP is also supported with "Read Data" functions.


   POINTS CLÉS
  SSI scripts used for easy display/control of process data on webpages
  Gateway diagnostics via WEB-pages
  DeviceNet Specification version: Vol 1: 2.0, Vol 2: 2.0 supported
  Conformance test version: A-12
  I/O Slave messaging: Bit strobe, Polling, Cyclic, COS and Explicit Messaging
  E-Mail Client, FTP & Telnet Server
  Profinet IO and IT functions
  Profinet 100 Mbit/s twisted pair RJ45 connection
  1 Mbyte storage space on Flash disk
  TCP/IP settings configurable with Profinet config tool, Anybus IPconfig, DHCP or the Profinet configuration tool.
  Support for Anybus OPC Server
  DeviceNet CONFORMANCE TESTED®

  SPÉCIFICATIONS TECHNIQUES
Taille:   114 mm x 44 mm x 127 mm
Power Supply:   24 VDC (±20%)
Température:   -25-65°C°C
Consommation:   max 400 mA
I/O Input:   Default 20 bytes, max 512 bytes
I/O Output:   Default 20 bytes, max 512 bytes
Puissance Mécanique:   IP20/Nema1
Power supply connect:   2-pole 5.08 mm Phoenix pluggable screw connector
Profinet connector:   RJ45
Profinet address:   Any valid IP-address
DeviceNet baud rate:   125-500 kbit/s
DeviceNet MacID:   0-63
DeviceNet connector:   5-pole 5.08 mm Phoenix pluggable screw connector
Profinet baudrate:   100Mbit/s
Price Group:   A
Code:   AB7653