|Profinet IO Device - Profibus Slave|
The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).
The Anybus OPC Server is supported and included with this X-gateway. It enables fast and dynamic transfer of fieldbus data to and from e.g. SCADA/HMI/Enterprice level systems based on Microsoft Windows.
The Profibus DP/DPV1 slave interface is implemented according to the standard IEC61158 as a modular slave, supporting all standard functionality such as Watchdog, Sync and Freeze and diagnostics. Including I&M functions. Standard DP as well as DPV1 acyclic data services (Class1/Class2) are supported. The Profibus interface module is certified by the Profibus user organization and has proven conformance and interoperability with leading PLC´s, HMI´s etc. Profibus address is set via rotary switches 0-99.
The Profinet IO interface is a complete solution for a Profinet IO slave Device. The module is based on the Siemens Profinet IO software technology.
The Profinet IO baudrate is 100Mbit/s (full duplex). The IP-address and additional IP-settings is easily configured with the Anybus IPconfig utility for Windows. Additional ways to set the IP-address are either via DHCP or Profinet configuration tool. Four diagnostic LEDs will continuously indicate the actual Profinet IO status and possible error messages. The Profinet IO interface uses a normal RJ45 connector for the bus connection.
IT-functions like WEB-server, E-mail client, FTP-server are also supported. The IT functions can be used simultaneously with the Profinet IO communication.
Modbus/TCP is also supported with "Read Data" functions.
|SSI scripts used for easy display/control of process data on webpages|
|Gateway diagnostics via WEB-pages|
|Sync and Freeze|
|Supports PA baud rate 45.45 kbit/s|
|Complete Profibus DP and DPV1 (Class1/Class2) slave functionality according to IEC 61158|
|Profinet IO and IT functions|
|Profinet 100 Mbit/s twisted pair RJ45 connection|
|1 Mbyte storage space on Flash disk|
|TCP/IP settings configurable with web-page, Anybus IPconfig, DHCP or Profinet Configuration tool|
|Support for Anybus OPC Server|
|Taille:||114 mm x 44 mm x 127 mm|
|Power Supply:||24 VDC (±20%)|
|Consommation:||Max 400mA at 24VDC|
|I/O Input:||Max 244 bytes using DP / 512 bytes using DPV1 (max 328 bytes in+out)|
|I/O Output:||Max 244 bytes using DP / 512 bytes using DPV1 (max 328 bytes in+out)|
|Config Méthode:||GSD files for Profibus and Profinet|
|Power supply connect:||2-pole 5.08 mm Phoenix pluggable screw connector|
|Profinet address:||Any valid IP-address|
|Profibus baudrate:||9600 bit/s - 12 Mbit/s autodetect|
|Profibus address:||Node address 0-99|
|Profibus connector:||D-sub 9-pin female|