Profinet IO Device - Profinet IO Device

The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).

The Anybus OPC Server is supported and included with this X-gateway. It enables fast and dynamic transfer of fieldbus data to and from e.g. SCADA/HMI/Enterprice level systems based on Microsoft Windows.

The Profinet IO interface is a complete solution for a Profinet IO slave Device. The module is based on the Siemens Profinet IO software technology.
The Profinet IO baudrate is 100Mbit/s (full duplex). The IP-address and additional IP-settings is easily configured with the Anybus IPconfig utility for Windows. Additional ways to set the IP-address are either via DHCP or Profinet configuration tool. Four diagnostic LEDs will continuously indicate the actual Profinet IO status and possible error messages. The Profinet IO interface uses a normal RJ45 connector for the bus connection.
IT-functions like WEB-server, E-mail client, FTP-server are also supported. The IT functions can be used simultaneously with the Profinet IO communication.
Modbus/TCP is also supported with "Read Data" functions.


   POINTS CLÉS
  Galvanical isolation between the two Profinet interfaces
  Logical isolation between the two Profinet interfaces
  SSI scripts used for easy display/control of process data on webpages
  Gateway diagnostics via WEB-pages
  Profinet 100 Mbit/s twisted pair RJ45 connection
  2 x 1 Mbyte storage space on Flash disk
  TCP/IP settings configurable with web-page, Anybus IPconfig, DHCP or Profinet configuration tool.
  Support for Anybus OPC Server

  SPÉCIFICATIONS TECHNIQUES
Taille:   114 mm x 44 mm x 127 mm
Power Supply:   24 VDC (±10%)
Température:   -25-65°C°C
Consommation:   max 400 mA at 24V
Baud Rate:   100 Mbit/s
I/O Input:   Default 20 bytes, max 512 bytes
I/O Output:   Default 20 bytes, max 512 bytes
Puissance Mécanique:   IP20/Nema1
Power supply connect:   2-pole 5.08 mm Phoenix pluggable screw connector
Profinet connectors::   RJ45
Profinet IP-address:   Any valid IP-addresses
Profinet config.:   Configured by any Profinet master using the supplied GSD file
Price Group:   A
Code:   AB7651