ModbusTCP Slave/Server - Profinet IO Device

The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).

The Anybus OPC Server is supported and included with this X-gateway. It enables fast and dynamic transfer of fieldbus data to and from e.g. SCADA/HMI/Enterprice level systems based on Microsoft Windows.

The gateway consists of two independent Ethernet interfaces, each with its own microporcessor system and TCP/IP stack.

The EtherNet interface consists of an embedded 2-port Modbus-TCP 10/100 Mbit/s interface with IT functionality such as WEB-server, SSI-scripts, Flash file system, FTP-server, Email client, Telnet etc. It is possible to build web pages displaying and controlling a factory floor process with data from the other connected network. The Modbus-TCP interface module is certified by the ODVA and has proven conformance and interoperability with leading PLC´s, HMI´s etc. The dual port Ethernet interface will allow daisy chaning and removes the need for any external switch.

The Profinet IO interface is a complete solution for a Profinet IO slave Device. The module is based on the Siemens Profinet IO software technology.
The Profinet IO baudrate is 100Mbit/s (full duplex). The IP-address and additional IP-settings is easily configured with the Anybus IPconfig utility for Windows. Additional ways to set the IP-address are either via DHCP or Profinet configuration tool. Four diagnostic LEDs will continuously indicate the actual Profinet IO status and possible error messages. The Profinet IO interface uses a normal RJ45 connector for the bus connection.
IT-functions like WEB-server, E-mail client, FTP-server are also supported. The IT functions can be used simultaneously with the Profinet IO communication.
Modbus/TCP is also supported with "Read Data" functions.


   POINTS CLÉS
  Support for AnyBus IPconfig utility for easy TCP/IP set up
  SSI scripts used for easy display/control of process data on WEB-pages
  Gateway diagnostics via WEB-pages
  E-Mail Client, FTP & Telnet Server
  Profinet IO and IT functions
  Two independent 100 MBit twisted pair RJ45 connections
  TCP/IP settings configurable with web-page, Anybus IPconfig, DHCP or ARP
  2 x 1 Mbyte storage space on Flash disk
  Support for Anybus OPC Server

  SPÉCIFICATIONS TECHNIQUES
Taille:   114 mm x 44 mm x 127 mm
Power Supply:   24 VDC (±20%)
Température:   -25-65°C°C
Consommation:   Max 400mA at 24VDC
I/O Input:   Default 20 bytes, max 512 bytes
I/O Output:   Default 20 bytes, max 512 bytes
Puissance Mécanique:   IP20/Nema1
Config Méthode:   GSD file for Profinet
Power supply connect:   2-pole 5.08 mm Phoenix pluggable screw connector
Ethernet baudrates:   10/100 Mbit/s autodetect
IP-addresses:   Any valid IP-address
Ethernet connectors:   RJ45
Profinet baudrate:   100Mbit/s
Price Group:   A
Code:   AB7650