|Ethernet/IP Adapter/Slave - Profinet IO Device|
The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).
The Anybus OPC Server is supported and included with this X-gateway. It enables fast and dynamic transfer of fieldbus data to and from e.g. SCADA/HMI/Enterprice level systems based on Microsoft Windows.
The EtherNet interface consists of an embedded 2-port Ethernet/IP 10/100 Mbit/s interface with IT functionality such as WEB-server, SSI-scripts, Flash file system, FTP-server, Email client, Telnet etc. It is possible to build web pages displaying and controlling a factory floor process with data from the other connected network. The EtherNet/IP interface module is certified by the ODVA and has proven conformance and interoperability with leading PLC´s, HMI´s etc. The dual port Ethernet interface will allow daisy chaning and removes the need for any external switch.
The Profinet IO interface is a complete solution for a Profinet IO slave Device. The module is based on the Siemens Profinet IO software technology.
The Profinet IO baudrate is 100Mbit/s (full duplex). The IP-address and additional IP-settings is easily configured with the Anybus IPconfig utility for Windows. Additional ways to set the IP-address are either via DHCP or Profinet configuration tool. Four diagnostic LEDs will continuously indicate the actual Profinet IO status and possible error messages. The Profinet IO interface uses a normal RJ45 connector for the bus connection.
IT-functions like WEB-server, E-mail client, FTP-server are also supported. The IT functions can be used simultaneously with the Profinet IO communication.
Modbus/TCP is also supported with "Read Data" functions.
|Galvanical isolation between the two Ethernet interfaces|
|Logical isolation between the two Ethernet interfaces|
|Ethernet/IP level 2 I/O Server CIP|
|Support for AnyBus IPconfig utility for easy TCP/IP set up|
|SSI scripts used for easy display/control of process data on webpages|
|Gateway diagnostics via WEB-pages|
|E-Mail Client, FTP & Telnet Server|
|Profinet IO and IT functions|
|Two twisted pair RJ45 connections|
|2 x 1 Mbyte storage space on Flash disk|
|TCP/IP settings configurable with Profinet config tool, Anybus IPconfig or DHCP|
|Support for Anybus OPC Server|
|EtherNet/IP CONFORMANCE TESTED™|
|Announced based DLR (Device Level Ring)|
|Taille:||114 mm x 44 mm x 127 mm|
|Power Supply:||24 VDC (±20%)|
|Consommation:||Max 400mA at 24VDC|
|Baud Rate:||100 Mbit/s|
|I/O Input:||Default 20 bytes, max 512 bytes|
|I/O Output:||Default 20 bytes, max 512 bytes|
|Config Méthode:||EDS and GSD files|
|Power supply connect:||2-pole 5.08 mm Phoenix pluggable screw connector|
|Ethernet/IP address:||Any valid IP-address|
|Ethernet/IP baudrate:||10/100 Mbit/s|
|Profinet baudrate:||100 Mbit/s|
|Profinet address:||Any valid IP address|