|ModbusTCP Slave/Server - Interbus Slave Cu|
The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).
The Anybus OPC Server is supported and included with this X-gateway. It enables fast and dynamic transfer of fieldbus data to and from e.g. SCADA/HMI/Enterprice level systems based on Microsoft Windows.
The Modbus-TCP interface consists of an embedded ModbusTCP 10/100 Mbit/s 2-port Ethernet interface with IT functionality such as WEB-server, SSI-scripts, Flash file system, FTP-server, Email client, Telnet etc. It is possible to build web pages displaying and controlling a factory floor process with data from the other connected network. The EtherNet/ModbusTCP interface module is certified by the Univeristy of Michigan and has proven conformance and interoperability with leading PLC´s, HMI´s etc. The 2-port Ethernet interface will allow daisy chaining thus removes the need for any external switch.
The Interbus 2Mbit/s interface module is a slave node that can be read from/written to by an Interbus master. Interbus has two ways of exchanging data; one through fast cyclical I/O data called ?Process Data?, and one through a somewhat slower protocol called PCP, which is mainly used for configuration purposes. It supports Interbus PCP V2.0. The module supports up to 10 words of data on the bus, out of which up to four words can be used for PCP.
|10/100 MBit twisted pair RJ45 connection|
|TCP/IP settings configurable with web-page, Configuration Tool, DHCP, ARP or with DIP switches|
|Modbus/TCP class 0, class 1 and partially class 2 slave functionality|
|1.4 Mbyte storage space on Flash disk|
|Support for AnyBus IPconfig utility for easy TCP/IP set up|
|SSI scripts used for easy display/control of process data on WEB-pages|
|Gateway diagnostics via WEB-pages|
|Individually isolated Bus In and Bus Out Interbus interfaces|
|Up to 10 words of Process data on Interbus|
|Interbus PCP v2.0 (0, 1, 2 or 4 words)|
|Support for Anybus OPC Server|
|Taille:||114 mm x 44 mm x 127 mm|
|Power Supply:||24 VDC (±20%)|
|Consommation:||max 400 mA|
|I/O Input:||Default 20 bytes, max 512 bytes (max 20 bytes as I/O on Interbus)|
|I/O Output:||Default 20 bytes, max 512 bytes (max 20 bytes as I/O on Interbus)|
|Power supply connector:||2-pole 5.08 mm Phoenix pluggable screw connector|
|Modbus-TCP baudrate:||10/100 Mbit/s autodetect|
|Modbus-TCP address:||Any valid IP-address|
|Interbus Baudrate:||500Kbit/s or 2Mbit/s|
|Interbus connectors:||D-sub 9-pin ? Bus In male, Bus Out female|