|Profibus Master - ModbusTCP Slave/Server|
The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).
The Anybus OPC Server is supported and included with this X-gateway. It enables fast and dynamic transfer of fieldbus data to and from e.g. SCADA/HMI/Enterprice level systems based on Microsoft Windows.
The Anybus-M Profibus-DP interface supports connection of up to 125 slaves at baudrates up to 12 Mbit/s. The Profibus configuration is defined with NetTool-PB, the windows based configuration software for Profibus from HMS (included free of charge).
The Profibus interface module is certified by the Profibus user organization and has proven conformance and interoperability with leading manufacturers of I/O, drives, instruments etc
Configuration is downloaded to the module via the RS232 configuration port.
The EtherNet interface consists of an embedded 2-port Ethernet/IP 10/100 Mbit/s interface with IT functionality such as WEB-server, SSI-scripts, Flash file system, FTP-server, Email client, Telnet etc. It is possible to build web pages displaying and controlling a factory floor process with data from the other connected network. The EtherNet/IP interface module is certified by the ODVA and has proven conformance and interoperability with leading PLC´s, HMI´s etc. The dual port Ethernet interface will allow daisy chaning and removes the need for any external switch.
|Built on Siemens ASIC ASPC2 Step E with Infineon C165 Microprocessor|
|Up to 125 slaves can be connected|
|Profibus configuration: NetTool-PB for Windows|
|Profibus configuration through RS232 configuration port|
|10/100 MBit twisted pair RJ45 connection|
|TCP/IP settings configurable with web-page, Configuration Tool, DHCP, ARP or with DIP switches|
|Modbus/TCP class 0, class 1 and partially class 2 slave functionality|
|1.4 Mbyte storage space on Flash disk|
|Support for AnyBus IPconfig utility for easy TCP/IP set up|
|SSI scripts used for easy display/control of process data on WEB-pages|
|Gateway diagnostics via WEB-pages|
|Complete Profibus DP Master according to IEC 61158|
|Support for Anybus OPC Server|
|Taille:||114 mm x 44 mm x 127 mm|
|Power Supply:||24 VDC (±20%)|
|Consommation:||Max 400mA at 24VDC|
|I/O Input:||Default 20 bytes, max 512 bytes|
|I/O Output:||Default 20 bytes, max 512 bytes|
|Power supply connector:||2-pole 5.08 mm Phoenix pluggable screw connector|
|Profibus baudrate:||9600 bit/s - 12 Mbit/s|
|Profibus address:||Node address 0-125|
|Profibus connector:||D-sub 9-pin female|
|Accessory order code:||018330 (NetTool-PB configuration tool for Profibus)|
|Modbus-TCP baudrate:||10/100 Mbit/s autodetect|
|Modbus-TCP address:||Any valid IP-address|