Interbus Slave Fo - CC Link Slave

The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).

The Interbus 2MBit/s interface with a Fiber Optic bus-interface is an important complement to the standard module for copper based cabling. The Fiber Optic module is based on the OPC chipset from Pheonix, which gives support for optical diagnostics. This means the unit has a high EMC immunity and also a very low EMC emission. The Interbus interface 2Mbit/s module is a slave node that can be read from/written to by an Interbus master. Interbus has two ways of exchanging data; one through fast cyclical I/O data called ?Process Data?, and one through a somewhat slower protocol called PCP, which is mainly used for configuration purposes. It supports Interbus PCP V2.0. The module supports up to 10 words of data on the bus, out of which up to four words can be used for PCP.

The CC-Link interface is a slave module for the CC-Link fieldbus system. It contains all the functionality needed to turn an application into a complete CC-Link remote device and it is configured to use the generic PLC profile. The CC-Link interface module is certified by the CLPA organisation and has proven conformance and interoperability with leading PLC´s, HMI´s etc


   POINTS CLÉS
  Up to 10 words of Interbus Process data
  PCP v2.0 (0, 1, 2 or 4 words)
  Fiber Optic features FSMA standard connectors conforming to IEC874-2 and DIN47258
  Based on OPC chipset with support for optical diagnostics
  Transmission Media: Plastic fibre, core 180um, clad 1000um: HCS (glass) fibre, core 200um, clad 230 um
  Uses up to 4 occupied stations on CC-Link - configurable size
  Uses the CC-Link PLC profile for data exchange
  Support for CC-Link version 2.0 with extended data

  SPÉCIFICATIONS TECHNIQUES
Taille:   114 mm x 44 mm x 127 mm
Power Supply:   24 VDC (±20%)
Température:   -25-65°C
Consommation:   max 400 mA
I/O Input:   Default 20 bytes, CC-Link V.2: max. 368 bytes (max 896 I/O-points and 128 words) CC-Link V.1: max 64 bytes (max 128 I/O-points and 16 words)
I/O Output:   Default 20 bytes, CC-Link V.2: max. 368 bytes (max 896 I/O-points and 128 words) CC-Link V.1: max 64 bytes (max 128 I/O-points and 16 words)
Puissance Mécanique:   IP20/Nema1
Power supply connector:   2-pole 5.08 mm Phoenix pluggable screw connector
Interbus Baudrate:   500Kbit/s or 2Mbit/s
Interbus connectors:   HFBR-2505C and HFBR-1505C
CC-Link baudrate:   156kbps to 10Mbps
CC-Link address:   Station 1-64
CC-Link connector:   5-pole 5.08 mm Phoenix pluggable screw connector
CC-Link config.:   Configured by CC Link Master via CSP Config file (provided by HMS)
Price Group:   C
Code:   AB7892