|Interbus Slave Cu - Modbus RTU Slave|
The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).
The Interbus 2Mbit/s interface module is a slave node that can be read from/written to by an Interbus master. Interbus has two ways of exchanging data; one through fast cyclical I/O data called ?Process Data?, and one through a somewhat slower protocol called PCP, which is mainly used for configuration purposes. It supports Interbus PCP V2.0. The module supports up to 10 words of data on the bus, out of which up to four words can be used for PCP.
The Modbus RTU Slave interface is implemented according to Modbus Protocol ref guide (PI-MBUS-300). All data is mapped to 3x and 4x Modbus areas meaning the Input Status and Output Register Word areas. The Modbus RTU standard baudrate is 19200 Bit/s but can be modified on the gateway between 1200 Bit/s to 57 600 Bit/s.
|Individually isolated Bus In and Bus Out Interbus interfaces|
|Up to 10 words of Process data on Interbus|
|Interbus PCP v2.0 (0, 1, 2 or 4 words)|
|Supported Modbus RTU functions: 1, 2, 3, 4, 5, 6, 8, 15, 16, 22, 23|
|Modbus RTU transmission media RS485|
|Taille:||114 mm x 44 mm x 127 mm|
|Power Supply:||24 VDC (±20%)|
|Consommation:||max 400 mA|
|I/O Input:||Default 20 bytes, max 512 bytes (max 20 bytes as I/O on Interbus)|
|I/O Output:||Default 20 bytes, max 512 bytes (max 20 bytes as I/O on Interbus)|
|Power supply connector:||2-pole 5.08 mm Phoenix pluggable screw connector|
|Interbus Baudrate:||500Kbit/s or 2Mbit/s|
|Interbus connectors:||D-sub 9-pin ? Bus In male, Bus Out female|
|Modbus RTU baudrate:||1200 Bit/s to 57 600 Bit/s|
|Modbus RTU address:||Node address 1-247|
|Modbus RTU connector:||D-sub 9-pin female|