FIP Slave - Modbus RTU Slave

The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).

The FIPIO interface is based an embedded Anybus-S module providing industrial performance and quality. FIPIO station address can be selected via switches on the end side of the module. A transformer connection on the module provides a isolated fieldbus interface.

The Modbus RTU Slave interface is implemented according to Modbus Protocol ref guide (PI-MBUS-300). All data is mapped to 3x and 4x Modbus areas meaning the Input Status and Output Register Word areas. The Modbus RTU standard baudrate is 19200 Bit/s but can be modified on the gateway between 1200 Bit/s to 57 600 Bit/s.


   POINTS CLÉS
  Supports both FIP and WorldFIP standards
  FIPIO profile FEDP (Extended Device Profile), class 0
  Transformer isolated FIP interface
  Supported Modbus RTU functions: 1, 2, 3, 4, 5, 6, 8, 15, 16, 22, 23
  Modbus RTU transmission media RS485

  SPÉCIFICATIONS TECHNIQUES
Taille:   114 mm x 44 mm x 127 mm
Power Supply:   24 VDC (±20%)
Température:   -25-65°C
Consommation:   max 400 mA
I/O Input:   Default 20 bytes, max 64 bytes
I/O Output:   Default 20 bytes, max 64 bytes
Puissance Mécanique:   IP20/Nema1
Power supply connector:   2-pole 5.08 mm Phoenix pluggable screw connector
FIPIO baudrate:   1 Mbit/s
FIPIO address:   Node address 0-99
FIPIO connector:   D-sub 9-pin male
Modbus RTU baudrate:   1200 Bit/s to 57 600 Bit/s
Modbus RTU address:   Node address 1-247
Modbus RTU connector:   D-sub 9-pin female
Price Group:   C
Code:   AB7877