|DeviceNet Adapter/Slave - Interbus Slave Cu|
The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).
The high performance DeviceNet Slave interface provides instant connectivity to the DeviceNet network. The module conforms to DeviceNet 2.0. The DeviceNet interface module is certified by the ODVA and has proven conformance and interoperability with leading PLC´s, HMI´s etc. Baud rate and MAC ID can be set via DIP switches.
The Interbus 2Mbit/s interface module is a slave node that can be read from/written to by an Interbus master. Interbus has two ways of exchanging data; one through fast cyclical I/O and one through a somewhat slower protocol called PCP, which is mainly used for configuration purposes. It supports Interbus PCP V2.0. The module supports up to 10 words of data on the bus, out of which up to four words can be used for PCP.
|DeviceNet Specification version: Vol 1: 2.0, Vol 2: 2.0|
|Conformance test version: A-12|
|I/O Slave messaging: Bit strobe, Polling, Cyclic, COS and Explicit Messaging|
|Individually isolated Bus In and Bus Out Interbus interfaces|
|Up to 10 words of Process data on Interbus|
|Interbus PCP v2.0 (0, 1, 2 or 4 words)|
|DeviceNet CONFORMANCE TESTED®|
|Taille:||114 mm x 44 mm x 127 mm|
|Power Supply:||24 VDC (±20%)|
|Consommation:||max 400 mA|
|I/O Input:||20 bytes, max 512 bytes (max 20 bytes as I/O on Interbus)|
|I/O Output:||20 bytes, max 512 bytes (max 20 bytes as I/O on Interbus)|
|Power supply connector:||2-pole 5.08 mm Phoenix pluggable screw connector|
|DeviceNet baud rate:||125-500 kbit/s|
|DeviceNet connector:||5-pole 5.08 mm Phoenix pluggable screw connector|
|DeviceNet config.:||Configured by DeviceNet Scanner via EDS file (provided by HMS)|
|Interbus Baudrate:||500Kbit/s or 2Mbit/s|
|Interbus connectors:||2*D-sub 9-pin; Bus In male, Bus Out female|