DeviceNet Adapter/Slave - DeviceNet Adapter/Slave

The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).

The products has two indepentet DeviceNet Slave interfaces, based on its own microprocessor system. Each of the two The module conforms to DeviceNet 2.0. The DeviceNet interface modules are certified by the ODVA and has proven conformance and interoperability with leading PLC´s, HMI´s etc. Baud rate and MAC ID can be set via DIP switches.


   POINTS CLÉS
  Galvanically isolated DeiceNet interfaces
  Logically separated DeviceNet interfaces
  DeviceNet Specification version: Vol 1: 2.0, Vol 2: 2.0
  Conformance test version: A-12
  I/O Slave messaging: Bit strobe, Polling, Cyclic, COS and Explicit Messaging
  DeviceNet CONFORMANCE TESTED®

  SPÉCIFICATIONS TECHNIQUES
Taille:   114 mm x 44 mm x 127 mm
Power Supply:   24 VDC (±20%)
Température:   -25-65°C
Consommation:   Max 400mA at 24VDC
Baud Rate:   125-500 kbit/s
I/O Input:   Default 20 bytes, max 512 bytes
I/O Output:   Default 20 bytes, max 512 bytes
Puissance Mécanique:   IP20/Nema1
Power supply connector:   2-pole 5.08 mm Phoenix pluggable screw connector
DeviceNet MacID:   0-63
DeviceNet connectors:   5-pole 5.08 mm Phoenix pluggable screw connector
DeviceNet config.:   Configured by DeviceNet Scanner via EDS file (provided by HMS)
Price Group:   A
Code:   AB7854