Profibus Slave - Modbus Plus Slave

The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).

The Profibus DP/DPV1 slave interface is implemented according to the standard IEC61158 as a modular slave, supporting all standard functionality such as Watchdog, Sync and Freeze and diagnostics. Including I&M functions. Standard DP as well as DPV1 acyclic data services (Class1/Class2) are supported. The Profibus interface module is certified by the Profibus user organization and has proven conformance and interoperability with leading PLC´s, HMI´s etc. Profibus address is set via rotary switches 0-99.

The Modbus Plus interface is based on licensed chip-set and software from Modicon Inc. Supporting both the Global Database and Register mapping to 3x and 4x registers this module implements a versatile Modbus Plus interface. The Modbus Plus interface module is certified by the Modconnect and has proven conformance and interoperability with leading PLC´s, HMI´s etc


   POINTS CLÉS
  Watchdog support
  Sync and Freeze
  Supports PA baud rate 45.45 kbit/s
  Modbus Plus Global Data Base Transaction, Point-to-Point commands, Read holding registers, Preset single register
  Modbus Plus Host Firmware Rev. 77
  Complete Profibus DP and DPV1 (Class1/Class2) slave functionality according to IEC 61158

  SPÉCIFICATIONS TECHNIQUES
Taille:   114 mm x 44 mm x 127 mm
Power Supply:   24 VDC (±20%)
Température:   -20-65°C
Consommation:   max 300 mA
I/O Input:   Max 244 bytes using DP / 512 bytes using DPV1 (max 64 bytes as Modbus Plus Global Data)
I/O Output:   Max 244 bytes using DP / 512 bytes using DPV1 (max 64 bytes as Modbus Plus Global Data)
Puissance Mécanique:   IP20/Nema1
Power supply connector:   2-pole 5.08 mm Phoenix pluggable screw connector
Profibus baudrate:   9600 bit/s - 12 Mbit/s autodetect
Profibus address:   Node address 0-99
Profibus connector:   D-sub 9-pin female
Profibus config.:   Configured by Profibus Master via GSD file (provided by HMS)
Modbus Plus baudrate:   1 Mbit/s
Modbus Plus address:   Node-ID and Source-ID 1-64
ModbusPlus connector:   D-sub 9-pin female
Price Group:   C
Code:   AB7851