|Profibus Slave - FIP Slave|
The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).
The Profibus DP/DPV1 slave interface is implemented according to the standard IEC61158 as a modular slave, supporting all standard functionality such as Watchdog, Sync and Freeze and diagnostics. Including I&M functions. Standard DP as well as DPV1 acyclic data services (Class1/Class2) are supported. The Profibus interface module is certified by the Profibus user organization and has proven conformance and interoperability with leading PLC´s, HMI´s etc. Profibus address is set via rotary switches 0-99.
The FIPIO interface is based an embedded Anybus-S module providing industrial performance and quality. FIPIO station address can be selected via switches on the end side of the module. A transformer connection on the module provides a isolated fieldbus interface.
|Sync and Freeze|
|Supports PA baud rate 45.45 kbit/s|
|Supports both FIP and WorldFIP standards|
|FIPIO profile FEDP (Extended Device Profile), class 0|
|Transformer isolated FIP interface|
|Complete Profibus DP and DPV1 (Class1/Class2) slave functionality according to IEC 61158|
|Taille:||114 mm x 44 mm x 127 mm|
|Power Supply:||24 VDC (±20%)|
|Consommation:||max 400 mA|
|I/O Input:||Default 20 bytes, max 64 bytes|
|I/O Output:||Default 20 bytes, max 64 bytes|
|Power supply connector:||2-pole 5.08 mm Phoenix pluggable screw connector|
|Profibus baudrate:||9600 bit/s - 12 Mbit/s autodetect|
|Profibus address:||Node address 0-99|
|Profibus connector:||D-sub 9-pin female|
|Profibus config.:||Configured by Profibus Master via GSD file (provided by HMS)|
|FIPIO baudrate:||1 Mbit/s|
|FIPIO address:||Node address 0-99|
|FIPIO connector:||D-sub 9-pin male|