Ethernet/IP Adapter/Slave - LonWorks

The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).

The Anybus OPC Server is supported and included with this X-gateway. It enables fast and dynamic transfer of fieldbus data to and from e.g. SCADA/HMI/Enterprice level systems based on Microsoft Windows.

The EtherNet/IP interface consists of an embedded 2-port Ethernet/IP 10/100 Mbit/s interface with IT functionality such as WEB-server, SSI-scripts, Flash file system, FTP-server, Email client, Telnet etc. It is possible to build web pages displaying and controlling a factory floor process with data from the other connected network. The EtherNet/IP interface module is certified by the ODVA and has proven conformance and interoperability with leading PLC´s, HMI´s etc. The dual port Ethernet interface will allow daisy chaning and removes the need for any external switch.

The LonWorks interface is a high performance interface to LonWorks networks. The interface supports LonMark objects handling. The required network variables on the LonWorks side can be configured and stored in FLASH. It is based on MIP that allows high throughput and a configurable set of up to 256 input and 256 output network variables. The interface can, via the "LWtool" PC-based configuration utility program, link, and convert data between the other network side and devices located on a LonWorks Network. The LonWorks side of the product can be configured for any type of network variable e.g. SNVT's or UNVT?s.


   POINTS CLÉS
  Ethernet 10/100 Mbit/s twisted pair RJ45 connection
  TCP/IP settings configurable with web-page, Configuration Tool, DHCP, ARP or with DIP switches
  Ethernet/IP level 2 I/O Server CIP
  1.4 Mbyte storage space on Flash disk
  Support for AnyBus IPconfig utility for easy TCP/IP set up
  SSI scripts used for easy display/control of process data on webpages
  Gateway diagnostics via WEB-pages
  Certification prepared for Lonmark application layer interoperability guidelines V3.2
  LonWorks FT-X1 Transceiver
  Support for Anybus OPC Server
  Includes special LW Config Software Tool for Network variable Setup
  EtherNet/IP CONFORMANCE TESTED™
  Announced based DLR (Device Level Ring)

  SPÉCIFICATIONS TECHNIQUES
Taille:   114 mm x 44 mm x 127 mm
Power Supply:   24 VDC (±20%)
Température:   -25-65°C
Consommation:   Max 400mA at 24VDC
I/O Input:   Default 20 bytes, max 512 bytes (256 network variables on LonWorks)
I/O Output:   Default 20 bytes, max 512 bytes (256 network variables on LonWorks)
Puissance Mécanique:   IP20/Nema1
Power supply connector:   2-pole 5.08 mm Phoenix pluggable screw connector
Ethernet/IP baudrate:   10/100 Mbit/s autodetect
Ethernet connector:   RJ45
Ethernet/IP address:   Any valid IP-address
Ethernet/IP config.:   Configured by EtherNet/IP Scanner via EDS file (provided by HMS)
LonWorks baudrate:   78 kbit/s
LonWorks Connector:   5-pole 5.08 mm Phoenix pluggable screw connector
LonWorks Config:   LW Tool ABX for LonWorks interface variable configuration, included.
Price Group:   C
Code:   AB7842