|Ethernet/IP Adapter/Slave - Modbus RTU Slave|
The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).
The Anybus OPC Server is supported and included with this X-gateway. It enables fast and dynamic transfer of fieldbus data to and from e.g. SCADA/HMI/Enterprice level systems based on Microsoft Windows.
The EtherNet/IP interface consists of an embedded 2-port Ethernet/IP 10/100 Mbit/s interface with IT functionality such as WEB-server, SSI-scripts, Flash file system, FTP-server, Email client, Telnet etc. It is possible to build web pages displaying and controlling a factory floor process with data from the other connected network. The EtherNet/IP interface module is certified by the ODVA and has proven conformance and interoperability with leading PLC´s, HMI´s etc. The dual port Ethernet interface will allow daisy chaning and removes the need for any external switch.
The Modbus RTU Slave interface is implemented according to Modbus Protocol ref guide (PI-MBUS-300). All data is mapped to 3x and 4x Modbus areas meaning the Input Status and Output Register Word areas. The Modbus RTU standard baudrate is 19200 Bit/s but can be modified on the gateway between 1200 Bit/s to 57 600 Bit/s.
|Ethernet 10/100 Mbit/s twisted pair RJ45 connection|
|TCP/IP settings configurable with web-page, Configuration Tool, DHCP, ARP or with DIP switches|
|Ethernet/IP level 2 I/O Server CIP|
|1.4 Mbyte storage space on Flash disk|
|Support for AnyBus IPconfig utility for easy TCP/IP set up|
|SSI scripts used for easy display/control of process data on webpages|
|Gateway diagnostics via WEB-pages|
|Supported Modbus RTU functions: 1, 2, 3, 4, 5, 6, 8, 15, 16, 22, 23|
|Modbus RTU transmission media RS485|
|Support for Anybus OPC Server|
|EtherNet/IP CONFORMANCE TESTED™|
|Announced based DLR (Device Level Ring)|
|Taille:||114 mm x 44 mm x 127 mm|
|Power Supply:||24 VDC (±20%)|
|Consommation:||Max 400mA at 24VDC|
|I/O Input:||Default 20 bytes, max 512 bytes|
|I/O Output:||Default 20 bytes, max 512 bytes|
|Power supply connector:||2-pole 5.08 mm Phoenix pluggable screw connector|
|Ethernet/IP baudrate:||10/100 Mbit/s autodetect|
|Ethernet/IP address:||Any valid IP-address|
|Ethernet/IP config.:||Configured by EtherNet/IP Scanner via EDS file (provided by HMS)|
|Modbus RTU baudrate:||1200 Bit/s to 57 600 Bit/s|
|Modbus RTU address:||Node address 1-247|
|Modbus RTU connector:||D-sub 9-pin female|