|Ethernet/IP Adapter/Slave - DeviceNet Adapter/Slave|
The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).
The Anybus OPC Server is supported and included with this X-gateway. It enables fast and dynamic transfer of fieldbus data to and from e.g. SCADA/HMI/Enterprice level systems based on Microsoft Windows.
The EtherNet/IP interface consists of an embedded 2-port Ethernet/IP 10/100 Mbit/s interface with IT functionality such as WEB-server, SSI-scripts, Flash file system, FTP-server, Email client, Telnet etc. It is possible to build web pages displaying and controlling a factory floor process with data from the other connected network. The EtherNet/IP interface module is certified by the ODVA and has proven conformance and interoperability with leading PLC´s, HMI´s etc. The dual port Ethernet interface will allow daisy chaning and removes the need for any external switch.
The high performance DeviceNet Slave interface provides instant connectivity to the DeviceNet network. The module conforms to DeviceNet 2.0. The DeviceNet interface module is certified by the ODVA and has proven conformance and interoperability with leading PLC´s, HMI´s etc. Baud rate and MAC ID can be set via DIP switches.
|Ethernet 10/100 Mbit/s twisted pair RJ45 connection|
|TCP/IP settings configurable with web-page, Configuration Tool, DHCP, ARP or with DIP switches|
|Ethernet/IP level 2 I/O Server CIP|
|1.4 Mbyte storage space on Flash disk|
|Support for AnyBus IPconfig utility for easy TCP/IP set up|
|SSI scripts used for easy display/control of process data on webpages|
|Gateway diagnostics via WEB-pages|
|DeviceNet Specification version: Vol 1: 2.0, Vol 2: 2.0|
|Conformance test version: A-12|
|I/O Slave messaging: Bit strobe, Polling, Cyclic, COS and Explicit Messaging|
|Support for Anybus OPC Server|
|EtherNet/IP CONFORMANCE TESTED™|
|DeviceNet CONFORMANCE TESTED®|
|Announced based DLR (Device Level Ring)|
|Taille:||114 mm x 44 mm x 127 mm|
|Power Supply:||24 VDC (±30%)|
|Consommation:||Max 400mA at 24VDC|
|I/O Input:||Default 20 bytes, max 512 bytes|
|I/O Output:||Default 20 bytes, max 512 bytes|
|Power supply connector:||2-pole 5.08 mm Phoenix pluggable screw connector|
|Ethernet/IP baudrate:||10/100 Mbit/s autodetect|
|Ethernet/IP address:||Any valid IP-address|
|Ethernet/IP config.:||Configured by EtherNet/IP Scanner via EDS file (provided by HMS)|
|DeviceNet baud rate:||125-500 kbit/s|
|DeviceNet connector:||5-pole 5.08 mm Phoenix pluggable screw connector|
|DeviceNet config.:||Configured by DeviceNet Scanner via EDS file (provided by HMS)|