|Ethernet/IP Adapter/Slave - Profibus Slave|
The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).
The Anybus OPC Server is supported and included with this X-gateway. It enables fast and dynamic transfer of fieldbus data to and from e.g. SCADA/HMI/Enterprice level systems based on Microsoft Windows.
The EtherNet interface consists of an embedded 2-port Ethernet/IP 10/100 Mbit/s interface with IT functionality such as WEB-server, SSI-scripts, Flash file system, FTP-server, Email client, Telnet etc. It is possible to build web pages displaying and controlling a factory floor process with data from the other connected network. The EtherNet/IP interface module is certified by the ODVA and has proven conformance and interoperability with leading PLC´s, HMI´s etc. The dual port Ethernet interface will allow daisy chaning and removes the need for any external switch.
The Profibus DP/DPV1 slave interface is implemented according to the standard IEC61158 as a modular slave, supporting all standard functionality such as Watchdog, Sync and Freeze and diagnostics. Including I&M functions. Standard DP as well as DPV1 acyclic data services (Class1/Class2) are supported. The Profibus interface module is certified by the Profibus user organization and has proven conformance and interoperability with leading PLC´s, HMI´s etc. Profibus address is set via rotary switches 0-99.
|Ethernet 10/100 Mbit/s twisted pair RJ45 connection|
|TCP/IP settings configurable with web-page, Configuration Tool, DHCP, ARP or with DIP switches|
|Ethernet/IP level 2 I/O Server CIP|
|1.4 Mbyte storage space on Flash disk|
|Support for AnyBus IPconfig utility for easy TCP/IP set up|
|SSI scripts used for easy display/control of process data on webpages|
|Gateway diagnostics via WEB-pages|
|Sync and Freeze|
|Supports PA baud rate 45.45 kbit/s|
|Complete Profibus DP and DPV1 (Class1/Class2) slave functionality according to IEC 61158|
|Support for Anybus OPC Server|
|EtherNet/IP CONFORMANCE TESTED™|
|Announced based DLR (Device Level Ring)|
|Taille:||114 mm x 44 mm x 127 mm|
|Power Supply:||24 VDC (±20%)|
|Consommation:||Max 400mA at 24VDC|
|I/O Input:||Max 244 bytes using DP / 512 bytes using DPV1 (max 344 bytes in+out)|
|I/O Output:||Max 244 bytes using DP / 512 bytes using DPV1 (max 344 bytes in+out)|
|Power supply connector:||2-pole 5.08 mm Phoenix pluggable screw connector|
|Ethernet/IP baudrate:||10/100 Mbit/s autodetect|
|Ethernet/IP address:||Any valid IP-address|
|Ethernet/IP config.:||Configured by EtherNet/IP Scanner via EDS file (provided by HMS)|
|Profibus baudrate:||9600 bit/s - 12 Mbit/s autodetect|
|Profibus address ran:||Node address 0-99|
|Profibus connector:||D-sub 9-pin female|
|Profibus config.:||Configured by Profibus Master via GSD file (provided by HMS)|