|AS-Interface Master - Ethernet/IP Adapter/Slave|
The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).
The Anybus OPC Server is supported and included with this X-gateway. It enables fast and dynamic transfer of fieldbus data to and from e.g. SCADA/HMI/Enterprice level systems based on Microsoft Windows.
The AS-Interface Master for the Anybus X-gateway implements an extended AS-Interface master (M4), and complies to version 3.0 of the AS-I Complete Specification.
It supports up to 62 slaves with a maximum of 248 digital input and 186 output signals. It also supports 124 analog values. All standard services are available including detailed diagnostics. The network interface is optically isolated and equipped with a 2-pin pluggable screw connector. The Master supports intelligent auto-configuration via the on-board configuration button or manual configuration via a terminal program such as Hyper Terminal for Windows.
The AS-interface module is certified by the AS Interface user organization and has proven conformance and interoperability with leading manufacturers of I/O, sensors, valves etc.
The EtherNet/IP interface consists of an embedded 2-port Ethernet/IP 10/100 Mbit/s interface with IT functionality such as WEB-server, SSI-scripts, Flash file system, FTP-server, Email client, Telnet etc. It is possible to build web pages displaying and controlling a factory floor process with data from the other connected network. The EtherNet/IP interface module is certified by the ODVA and has proven conformance and interoperability with leading PLC´s, HMI´s etc. The dual port Ethernet interface will allow daisy chaning and removes the need for any external switch.
|Manages control of up to 62 AS-Interface slaves|
|248 digital inputs and 186 digital outputs|
|Intelligent auto configuration support|
|Ethernet 10/100 Mbit/s twisted pair RJ45 connection|
|TCP/IP settings configurable with web-page, Configuration Tool, DHCP, ARP or with DIP switches|
|Ethernet/IP level 2 I/O Server CIP (ControlNet & DeviceNet)|
|1.4 Mbyte storage space on Flash disk|
|Support for AnyBus IPconfig utility for easy TCP/IP set up|
|SSI scripts used for easy display/control of process data on webpages|
|Gateway diagnostics via WEB-pages|
|Supporting AS-Interface version 3.0|
|Support for Anybus OPC Server|
|EtherNet/IP CONFORMANCE TESTED™|
|Announced based DLR (Device Level Ring)|
|Taille:||114 mm x 44 mm x 127 mm|
|Power Supply:||24 VDC (±20%)|
|Consommation:||Max 400mA at 24VDC|
|I/O Input:||Default 20 bytes, max 64 bytes (248 digital inputs)|
|I/O Output:||Default 20 bytes, max 64 bytes (186 digital outputs)|
|Power supply connector:||2-pole 5.08 mm Phoenix pluggable screw connector|
|AS-I baudrate:||167 kbit/s|
|AS-I connector:||2 x 2-pole 5.08 mm Phoenix pluggable screw connectors|
|Ethernet/IP baudrate:||10/100 Mbit/s autodetect|
|Ethernet/IP address:||Any valid IP-address|
|Ethernet/IP config.:||Configured by EtherNet/IP Scanner via EDS file (provided by HMS)|