DeviceNet Scanner/Master - Modbus Plus Slave

The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).

The DeviceNet Master interface can act both as a Master/Scanner and/or Adapter/Slave. The entire DeviceNet protocol is implemented into the module. The module manages control of up to 63 DeviceNet slaves. Full DeviceNet configuration can be defined and loaded into the Anybus-M module via the HMS configuration software NetTool-DN (included free of charge) or via Rockwell´s RSNetWorx.

The Modbus Plus interface is based on licensed chip-set and software from Modicon Inc. Supporting both the Global Database and Register mapping to 3x and 4x registers this module implements a versatile Modbus Plus interface. The Modbus Plus interface module is certified by the Modconnect and has proven conformance and interoperability with leading PLC´s, HMI´s etc


   POINTS CLÉS
  Complete DeviceNet 2.0 scanner implementation according to ODVA
  DeviceNet Group 2 Client/Server / UCMM support
  Manages up to 63 DeviceNet slaves
  DeviceNet Configuration via AnyBus NetTool-DN or RSNetworx
  DeviceNet Explicit peer to peer messaging, configuration consistency value. I/O Slave messaging: Bit strobe, Polling, Cyclic & Change of State (COS)
  Modbus Plus Global Data Base Transaction, Point-to-Point commands, Read holding registers, Preset single register
  Modbus Plus Host Firmware Rev. 77

  SPÉCIFICATIONS TECHNIQUES
Taille:   114 mm x 44 mm x 127 mm
Power Supply:   24 VDC (±20%)
Température:   -25-65°C
Consommation:   max 400 mA
I/O Input:   Default 20 bytes, max 512 bytes (max 64 bytes as Modbus Plus Global Data)
I/O Output:   Default 20 bytes, max 512 bytes (max 64 bytes as Modbus Plus Global Data)
Puissance Mécanique:   IP20/Nema1
Power supply connector:   2-pole 5.08 mm Phoenix pluggable screw connector
DeviceNet baudrate:   125-500 kbit/s
DeviceNet MacID:   0-63
DeviceNet connector:   5-pole 5.08 mm Phoenix pluggable screw connector
Modbus Plus baudrate:   1 Mbit/s
Modbus Plus address:   Node-ID and Source-ID 1-64
ModbusPlus connector:   D-sub 9-pin female
Accessory order:   018021 (NetTool-DN configuration tool for DeviceNet)
Price group:   C
Code:   AB7818