Profibus Master - CANopen Slave

The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).

The Anybus Profibus-DP Master interface supports connection of up to 125 slaves at baudrates up to 12 Mbit/s. The Profibus configuration is defined with NetTool-PB, the windows based configuration software for Profibus from HMS (included free of charge).
The Profibus interface module is certified by the Profibus user organization and has proven conformance and interoperability with leading manufacturers of I/O, drives, instruments etc
Configuration is downloaded to the module via the RS232 configuration port.

The CANopen interface is an adapter class product allowing fast data exchange. The CANopen slave?s data map consists of Process Data Objects (fast data) and Service Data Objects (slow data). The data on the CANopen bus is updated when a change is made or on request from another node. The CANopen interface module is certified by the Can In Automation organisation and has proven conformance and interoperability with leading PLC´s, SoftPLC´s, HMI´s etc


   POINTS CLÉS
  Profibus configuration: NetTool-PB for Windows
  Built on Siemens ASIC ASPC2 Step E with Infineon C165 Microprocessor
  Up to 125 slaves can be connected
  Profibus configuration through RS232 configuration port
  CANopen PDO and SDO data objects supported
  CANopen Unscheduled data exchange support
  Complete Profibus DP Master according to IEC 61158
  Heatbeat and node guarding support
  Customizable PDO-mapping
  Network Stor/Restore functionality
  CANopen profile DS-301 v.4.02

  SPÉCIFICATIONS TECHNIQUES
Taille:   114 mm x 44 mm x 127 mm
Power Supply:   24 VDC (±20%)
Température:   -25-65°C
Consommation:   Max 400mA at 24VDC
I/O Input:   Default 20 bytes, max 512 bytes
I/O Output:   Default 20 bytes, max 512 bytes
Puissance Mécanique:   IP20/Nema1
Power supply connector:   2-pole 5.08 mm Phoenix pluggable screw connector
Profibus baudrate:   9600 bit/s - 12 Mbit/s
Profibus address:   Node address 0-125
Profibus connector:   D-sub 9-pin female
Accessory order code:   018330 (NetTool-PB configuration tool for Profibus)
CANopen baudrate:   10 kbit/s to 1 Mbit/s
CANopen connector:   D-sub 9-pin male
CANopen address:   Node address 1-99
CANopen config.:   Configured by CanOpen Master via EDS file (provided by HMS)
Price Group:   B
Code:   AB7807