Profibus Master - Interbus Slave Cu

The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).

The Anybus Profibus-DP Master interface supports connection of up to 125 slaves at baudrates up to 12 Mbit/s. The Profibus configuration is defined with NetTool-PB, the windows based configuration software for Profibus from HMS (included free of charge).
The Profibus interface module is certified by the Profibus user organization and has proven conformance and interoperability with leading manufacturers of I/O, drives, instruments etc
Configuration is downloaded to the module via the RS232 configuration port.

The Interbus 2Mbit/s interface module is a slave node that can be read from/written to by an Interbus master. Interbus has two ways of exchanging data; one through fast cyclical I/O data called ?Process Data?, and one through a somewhat slower protocol called PCP, which is mainly used for configuration purposes. It supports Interbus PCP V2.0. The module supports up to 10 words of data on the bus, out of which up to four words can be used for PCP.


   POINTS CLÉS
  Profibus configuration: NetTool-PB for Windows
  Built on Siemens ASIC ASPC2 Step E with Infineon C165 Microprocessor
  Up to 125 slaves can be connected
  Profibus configuration through RS232 configuration port
  Individually isolated Bus In and Bus Out Interbus interfaces
  Up to 10 words of Process data on Interbus
  Interbus PCP v2.0 (0, 1, 2 or 4 words)
  Complete Profibus DP Master according to IEC 61158

  SPÉCIFICATIONS TECHNIQUES
Taille:   114 mm x 44 mm x 127 mm
Power Supply:   24 VDC (±20%)
Température:   -25-65°C
Consommation:   max 400 mA
I/O Input:   Default 20 bytes, max 512 bytes (max 20 bytes as I/O on Interbus)
I/O Output:   Default 20 bytes, max 512 bytes (max 20 bytes as I/O on Interbus)
Puissance Mécanique:   IP20/Nema1
Power supply connector:   2-pole 5.08 mm Phoenix pluggable screw connector
Profibus baudrate:   9600 bit/s - 12 Mbit/s
Profibus address:   Node address 0-125
Profibus connector:   D-sub 9-pin female
Accessory order code:   018330 (NetTool-PB configuration tool for Profibus)
Interbus Baudrate:   500Kbit/s or 2Mbit/s
Interbus connectors:   D-sub 9-pin ? Bus In male, Bus Out female
Price Group:   C
Code:   AB7805