Profibus Master - DeviceNet Adapter/Slave

The Anybus X-gateway copies I/O-data in both directions thus enabling data exchange between the two networks. Default I/O configuration is 20 bytes Input and 20 bytes Output. Changing default settings is very easy using the windows based configuration software Anybus Configuration Manager X-gateway from HMS (free of charge).

The Anybus-M Profibus-DP interface supports connection of up to 125 slaves at baudrates up to 12 Mbit/s. The Profibus configuration is defined with NetTool-PB, the windows based configuration software for Profibus from HMS (included free of charge).
The Profibus interface module is certified by the Profibus user organization and has proven conformance and interoperability with leading manufacturers of I/O, drives, instruments etc
Configuration is downloaded to the module via the RS232 configuration port.

The high performance DeviceNet Slave interface provides instant connectivity to the DeviceNet network. The module conforms to DeviceNet 2.0. The DeviceNet interface module is certified by the ODVA and has proven conformance and interoperability with leading PLC´s, HMI´s etc. Baud rate and MAC ID can be set via DIP switches.


   POINTS CLÉS
  Profibus configuration: NetTool-PB for Windows
  Built on Siemens ASIC ASPC2 Step E with Infineon C165 Microprocessor
  Up to 125 slaves can be connected
  Profibus configuration through RS232 configuration port
  DeviceNet Specification version: Vol 1: 2.0, Vol 2: 2.0
  Conformance test version: A-12
  I/O Slave messaging: Bit strobe, Polling, Cyclic, COS and Explicit Messaging
  Complete Profibus DP Master according to IEC 61158
  DeviceNet CONFORMANCE TESTED®

  SPÉCIFICATIONS TECHNIQUES
Taille:   114 mm x 44 mm x 127 mm
Power Supply:   24 VDC (±20%)
Température:   -25-65°C
Consommation:   Max 400mA at 24VDC
I/O Input:   Default 20 bytes, max 512 bytes
I/O Output:   Default 20 bytes, max 512 bytes
Puissance Mécanique:   IP20/Nema1
Power supply connector:   2-pole 5.08 mm Phoenix pluggable screw connector
Profibus baudrate:   9600 bit/s - 12 Mbit/s
Profibus address:   Node address 0-125
Profibus connector:   D-sub 9-pin female
Accessory order code:   018330 (NetTool-PB configuration tool for Profibus)
DeviceNet baudrate:   125-500 kbit/s
DeviceNet MacID:   0-63
DeviceNet connector:   5-pole 5.08 mm Phoenix pluggable screw connector
DeviceNet config.:   Configured by DeviceNet Scanner via EDS file (provided by HMS)
Price Group:   B
Code:   AB7802